MANUEL Cement Compression & Flexure Testing Machines

87 680 981 сўм

Product Code


250 kN (56.200 lbf) Manual Cement Compression Testing Machine


250/15 kN (56.200/3370 lbf)  Manual Cement Compression/Flexure Testing Machine


Lower and Upper (spherical seated)

Loading Platen,  Ø:165 mm


Flexure Jig Assembly to test

40x40x160 mm prisms, ASTM


Flexure Jig Assembly to test

40.1x40x160 mm prisms, EN


Compression Jig Assembly to test

50 mm (2”) cubes


Compression Jig Assembly to test portions of 40.1x40x160 mm prisms, EN


Compression Jig Assembly BS, to test

70,7 mm cubes


Transparent Front-Rear Safety Doors for UTCM-3722


Transparent Front-Rear Safety Doors for UTCM-3722



EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 4550-3.4


The UTCM-3722.MLP and UTCM-3742.MLP single and double testing chamber Manual compression and flexure testing machines are designed to perform reliable strength and flexure tests on mortar specimens. The manual machines are especially suitable for on-site applications when electric power supply is not available.

Being a low cost alternative, UTEST manual testing series combine precision and simplicity with the unique design of the manual power pack which enables even an inexperienced operator to perform excellent compression and flexure tests on-site.

These manual testing machines conform to the standards EN 196-1, 459-2, 1015-11, 13454-2; ASTM C 109, C348, C349 by using suitable accessories. They also meet with the requirements of CE norms with respect to operator health and safety.

The UTEST manuel cement compression and flexure testing machines consist of very rigid two column single or double chamber frame, manuel power pack and data acquisition system LPI.

Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately.


UTC-4810_Hand_Operated_Hydraulic_Power_Pack (1)

Manuel Power Pack

The UTC-4810 Hand Operated (Manual) Hydraulic Power Pack has been designed to be used with range of UTEST Compression machines and flexural frames to use on site and/or where electricity is not available.

The pump is equipped with a radial piston pump so that the loading is continuous as long as user turns the wheel installed on the pump. The loading is uniform as on an automatic machine.


UTC-4920LP_LPI_Battery_Operated_Digital_Readout_Unit (1)

LPI Battery Operated Digital Readout Unit

The LPI Battery Operated Digital Readout Unit (UTC-4920LP)  has been designed to use with load cells or pressure transducers on different material test applications.


The unit is operates with DC voltage source of -1,5 to 1,5 volts.

  •  Real time numeric display of load and load rate
  •  1 channel with two different calibration table (by changing the sensor belong to other frame, the unit can be control for second test frame)
  •  Peak hold property
  •  Multi-point calibration
  •  Can operate with 2 x AA batteries
  •  Easy preload zeroing
  •  Serial port for PC or printer
  •  8 keys keyboard
Technical Specifications




Test Type





250 kN (56.200 lbf)

15 kN (3370 lbf)

250 kN(56.200 lbf)

Class 1 Measuring Range

1 % for 250 kN

1 % for 15 kN

1 % for 50 kN

The Roughness Value for Texture of Loading Platens

≤3.2 μm

 ≤3.2 μm

≤3.2 μm

Lower Platen Dimensions

165 mm (6,5”)

165 mm (6,5”)

165 mm (6,5”)

Upper Platen Dimensions

165 mm (6,5”)

165 mm (6,5”)

165 mm (6,5”)

Maximum Vertical Clearance Between Platens

237 mm (9,3”)

237 mm (9,3”)

237 mm (9,3”)

Piston Diameter

Ø160 mm (6,3”)

Ø160 mm (6,3”)

Ø160 mm (6,3”)

Maximum Piston Movement with Limit Switch

20 mm (1,18”)

20 mm (1,18”)

20 mm (1,18”)

Horizontal Clearance

300 mm (11,8”)

 274 mm (10,8”)

266 mm (10,47”)

Oil Capacity

13 L

13 L

Rapid Approach Rate

50 mm/min

2 inc/min

80 mm/min

3,15 inc/min

50 mm/min

2 inc /min

Dimensions (WxLxH)

760x500x1580 mm


950x500x1580 mm

( 37,4”x19,7”x62,2”)


230 kg (518 lbs)

320 kg (705 lbs)

The Maximum horizontal clearance for placing the sample is limited by the border of the platens. Sample must be placed such that its ends will not overlap the ends of platens and it must be centered perfectly.The minimum vertical clearance for the specimen can be adjusted using the distance pieces.

Sign in to leave a comment
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:

Is located in sections