Steel Rack Testing Systems

0 сўм

Product Code

UTSP-0450   Steel Rack Testing Systems

Utest Material Testing Equipment offers a wide range of products and services to support all aspects of mechanical and structural engineering. For other applications, additional consultancy service is available. Our experienced engineers can make your job easier. Utest can make custom design systems as it seen on the pictures.

Static testing machines below have double acting pistons with force capacities of 1000 kN, 500 kN and 100 kN. Static testing actuators can be controlled by a single hydraulic power unit. Different than the static testing machines Utest manufactured 10 Hz. cyclic testing capable 50 kN dynamic testing machine for dynamic and fatigue behavior of the connections at steel storage racks systems.

Electrical parts as indicators, system management buttons and controller is involved in the power pack. Bladder type accumulators are supplied with the pack in order to compensate pressure drops while actuator is operating and any pressure losses between the HPU and test station, in order to smooth pump ripples. Oil level, oil temperature, filter's condition and motor temperature are continuously checked by controller and system has necessary interlocks for fault conditions. Factory –set pressure relief valve prevents excessive increases in pressure. Compact designed power pack saves valuable floor space in your lab. Installed isolation manifold lets the pack running multiple test stations, preventing over pressurization, discharging system pressure separately and power isolation of the stations.

These systems are for testing different type of storage-shelfves as Bending Tests on Beam End Connectors, Looseness Test on Beam End Connectors, Shear Tests on Beam End Connectors, Stub Column Compression Tests, Compressive Tests on Uprights, Bending Tests on Upright Position and Bend Tests on Beams.

Steel rack testing systems are controlled by a computer with the free of charge software uSta and uDyna. uSta and uDyna are flexible and user-friendly windows based application software for static and dynamic testing. In the software user can also create custom test sequences. Synchronized 100 Hz data transfer from feedback signals supplies detailed recording of running tests. This rate is flexible up to 4 kHz if the application is applicable. Graphical and numeric monitoring is displayed real time in the user interface. The software also includes an easy calibration check facility. The machine gives some constant load values and waits there for easy check mechanism. Furthermore uData is also delivered to customer freely, where data analyzing and reporting operations will be handled.


Technical Specifications 1

Test Type

Bending Tests on Beam End Connectors (EN 15512-2009 Sec A 2.4)

Looseness Test on Beam End Connectors (EN 15512-2009 Sec 5.3.2 )

Shear Tests on  Beam End Connectors (EN 15512-2009 Sec 5.3.2)

Piston Capacity

2000 kN (double acting)

Piston Stroke

450 mm

Horizontal Test Daylights

2000 mm

Vertical Test Daylights

from 100 mm up to 650 mm

Technical Specifications 2

Test Type

Test on Floor Connections EN 15512. 2009, Sec A 2.7

Piston Capacity

200 kN (Vertical load - double acting)

100 kN (Horizontal load - double acting)

Piston Stroke

200 mm (Vertical load)

200 mm (Horizontal load)

Technical Specifications 3

Test Type

Stub Column Test Compression Tests On Uprights

Test On Uprights Splices EN15512 : 2009 Sec A2.1.2

Piston Capacity

1000kn  Double Acting Type

Piston Stroke

250 mm Profile  and Upright Lengths From  200 mm  Up To 3000 mm  Can Be Tested

Technical Specifications 4

Test Type

Cyclic Test  On  Beam  - To -  Column  Connection

Piston Capacity / Stroke

10kn / 100 mm  Double Acting Type

( 2 Off for Simulating Test Load to  Beam to Column Junction )

100 kn / 100 mm Double Acting Type

(1 Off  for  Simulating Test Load  to  Column )

Hydraulic  Actuators

50 Kn  / +/- 120 mm , 5 L / Min.

( 2 Off  for Simulating Moment Load to Beam Ends)

Technical Specifications 5

Test Type

Bending Tests on Upright Sections ( Major Axis )  ( EN 15512 ,2009)

Bending Tests on Beams  ( Major Axis )  ( EN 15512 ,2009)

Piston Capacity

500 kN ( Double Acting )

Piston Stroke

200 mm

Vertical Test Clearance   

200 mm

Horizontal Test Clearance 

6000 mm  X 3000 mm

Sign in to leave a comment
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:

Is located in sections