Relative Density Test Set

0
0 сўм
Кол-во:
Description

Product Code

UTS-0670A-C

Relative Density Test Set,

ASTM, 380V 50Hz, 3 ph.

UTS-0672A

Relative Density Mould Set, 

ASTM, 0.5 ft 3

UTS-0673A

Relative Density Mould Set, 

ASTM, 0.1 ft 3

UTS-0674A

Relative Density Gauge Set, ASTM

UTS-0675

Pouring Funnel Set,

for Relative Density Test.

UTS-0676

Compass Crane with Electric Motor

UTS-0678

Equipment for Calibration of Amplitude of Vibrating Table

 

Standards

ASTM D4253 (Method 1A—1B), D4254

 

Relative Density Test Set acc.to ASTM  is used for the determination of the relative density of cohesionless soil for which impact compaction will not produce a well defined moisture-density relationship curve and where the maximum density of impact method will generally be less than by vibratory method. The test is applicable to soils that may contain up to 15 %, by dry mass, of soil particles passing a No 200 (75-μm) sieve, provided they still have cohesionless, free-draining characteristics. Further, these test methods are applicable to soils in which 100 %, by dry mass, of soil particles pass a 3-in. (75-mm) sieve.

 

Vibration Frequency

50 Hz

Amplitude Range

Between about 0.20 mm and  0.48 mm

Vibrating Table Type

Electromagnetic

 

UTS-0670A-C, Relative Density Test Set consists of a electromagnetic vibrating table with controller, relative density mold sets ( 0,1 ft.and 0,5 ft.3) and relative density gauge set.

UTS-0672A or UTS-0673A, Relative Density Mould Set consists of a mould,  circular surcharge weight with handle, surcharge base plate with handle  and detachable guide sleeve with clamp assembly.

UTS-0674A, Relative Density Gauge Set consists of a analog displacement dial gauge (50 x 0.01 mm division, 0-100 scale - UTGM-0132  ) with holder and calibration bar, metal 75 x 300 x 6mm set.

UTS-0676, Cross Crane with Elelectric Motor is used for handling of surcharge weights for user healty during the test. The Crane be anchored to a rigid wall and/or concrete ground.

UTS-0678, Equipment for Amplitude Calibration of Vibrating Table consists of a software for vibration amplitude measurement, data acquisition (1000 record/second) unit, electronic displacement transducer (accuracy  0.0005 in. - 0.015 mm) and mount for displacement transducer (for mounting the transducer at the top of the mold. during the calibration )

UTS-0675, UTS-0676 and UTS-0678 should be ordered seperately.

 

Product Code

Dimensions

Weight (approx.)

UTS-0670A-C

1400x760x570 mm

135 kg

UTS-0672

390x390x490 mm

130 kg

UTS-0673A

240x240x490 mm

45 kg

UTS-0674A

100x100x320 mm

1,8 kg

UTS-0675

170x170x530 mm

8 kg

UTS-0676

2100x1850x400 mm

95 kg

share
Sign in to leave a comment
Registration
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:
Комментарий:

Is located in sections

Back