EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders

0
0 сўм
Кол-во:
Description

Product Code

UTS-5727.SLP

2000 kN Capacity Compression Testing Machines, for Cubes and Cylinders, EN

UTC-5737.SLP

3000 kN Capacity Compression Testing Machines, for Cubes and Cylinders, EN

UTC-0210

High Precision Pressure Transducer and Electronic

UTC-4682

Pedestal for 2000kN and 3000 kN Compression Testing Frames with Welded Walls

 

Models for 220-240V 50-60 Hz, 1ph

UTC-5727.SLP

UTC-5737.SLP

Models for 110-120V 60 Hz, 1ph

UTC-5727.SLP-N

UTC-5737.SLP-N

 

Standards

EN 12390-4, EN 12390-3

 

UTC-5727.SLP and UTC-5737.SLP models Semi-Automatic Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN standards.

These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.

The Semi-Automatıc Compression Machines consist of a welded frame (see table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-4920LP).

UTC-4682 Pedestal for the frames of the machines should be ordered separately.

 

Main Features

  • Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
  • 1 channel with two different calibration table, test parameters and specimen  information (by changing the sensor belong to other frame, the unit can be control for second test frame)
  • Multi-point calibration 
  • Real time numeric display of load and load pressure
  • Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4
  • Welded steel walled frame with lower and upper (shperically-seated) loading platens
  • Load measurment with a pressure transducer
  • Hydrolic pump with dual stage for rapid approach
  • RS232  Serial port for PC or thermal or dot matrix printer
  • Free of charge Utest software for compression/flexture testing machines (USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonary units

 

Safety Features

  • Maximum pressure valves to avoid machine overloading
  • Limit switch for piston stroke
  • Removable transparent front and rear safety doors

 

USOFT-4820.SLP Test Software is improved for semi-automatic concrete compression and flexural testing machines with LPI Battery Operated Digital Readout Unit durring the test to collect and record data and to prepare the report containing the results obtained.Before the test, a PC which the Utest software is installed is connected to RS232 port of LPI reading unit, the data obtained in the test can be monitored and recorded in real time. The advanced functions for data base management provide an easy navigation of all saved data. Test report including the test results and user defined test information (names and the Company details, test type, specimen type, user info and other knowledge required) can be print out.

 

EN 12390-4  SEMI-AUTOMATIC COMPRESSION TESTING MACHINES FOR CUBES AND CYLINDERS

Models

UTC-5727.SLP

UTC-5737.SLP

Product Photo

UTC 5727 SLP

UTC 5737 SLP EN

Capacity

2000 kN

3000 kN

Frame Type

Welded Steel

Welded Steel

Lower Bearing Block, Dimensions (D)

Ø 300 mm

Ø 300 mm

Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)

Ø 300 mm

Ø 300 mm

Surface Hardness of Bearing Blocks

 53 HRC

 53 HRC

Flatness Tolerance

0,03 mm

0,03 mm

Piston Diameter

250 mm

300 mm

Piston Stroke

50 mm

50 mm

Maximum Vertical Clearance

Between Bearing Blocks (E)

350 mm

350 mm

Horizontal Clearance (B)

360 mm

415 mm

Sizes of Specimens For Cubes (up to)

200 mm (**)

200 mm (**)

Sizes of Specimens For Cylinders (up to)

Ø160x320 mm

Ø160x320 mm

Power

550 W

550 W

Oil Capacity

20 L

20 L

Maximum Working Pressure

410 Bar

410 Bar

Dimensions (wxlxh) (Axd*xF)

750x455x1145 mm

805x500x1205 mm

Weight

820 kg

1060 kg

Pedestal (Optional)

UTC-4682

UTC-4682

(d*) depth      

(**) Limited by capacity of the  frame

 

The machines  for cubes and cylinders are supplied complete with;

• 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces

• UTC-4622E - Fixture for Centering Specimens, compatible with Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders

• Removable transparent front and rear safety doors

 

Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150mm should be ordered separately.

share
Sign in to leave a comment
Registration
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:
Комментарий:

Is located in sections

Back