EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes

0
0 сўм
Кол-во:
Description

Product Code

UTC-4609EG

600 kN EN 772-1 and General  Purpose Compression Testing  Frame for Masonary Units/ Blocks, Cylinders and Cubes

UTC-4709EG

1100 kN EN 772-1 and General  Purpose Compression Testing  Frame for Masonary Units/ Blocks, Cylinders And Cubes

UTC-4682

Pedestal for 2000kN and 3000 kN Compression Testing Frames with Welded Walls

 

UTC-4609EG and UTC-4609EG compression testing frames for masonary units/ blocks, cylinders and cubes  consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens.

The compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.

Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be  positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.

All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with their load capacities. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.

The lower loading platens are provided with lines for centering specimens

UTC-4682 Pedestal that are made of steel to facilitate  the user’s  placement of specimens in the frames for compression test should be ordered separately.

See the below table for supplied items with the frames.

 

GENERAL PURPOSE AND EN 772-1  COMPRESSION TESTING FRAMES

FOR CUBES, CYLİNDERS AND BLOCKS /MASONARY UNIT

Models

UTC-4609EG

UTC-4709EG

Product Photo

UTC 4799EG 1100 kN

UTC 4799EG 1100 kN

Capacity

600 kN

1100 kN

Frame Type

Welded Steel

Welded Steel

Lower Bearing Block, Dimensions (D)

310x510x50 mm 

310x510x50 mm 

Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)

310x510x50 mm 

310x510x50 mm 

Surface Hardness of Bearing Blocks

 55 HRC

 55 HRC

Flatness Tolerance

0,05 mm

0,05 mm

Piston Diameter

230 mm

230 mm

Piston Stroke

50 mm

50 mm

Maximum Vertical Clearance

Between Bearing Blocks (E)

330 mm

330 mm

Horizontal Clearance (B)

320 mm

320 mm

Specimens Sizes (**)

up to 300x500mm masonary units/blocks

up to Ø160x320 mm cylinders

200 mm cubes

Dimensions (wxlxh) (Axd*xF)

380x550x750 mm

380x550x750 mm

Weight

690 kg

690 kg

Pedestal (Optional)

UTC-4680

UTC-4680

(d*) depth      

(**) Limited by capacity of the  frame

 

The frames supplied complete with;

• 100 mm, 50 mm, 30 mm height x Ø165 mm distance pieces

• Lifting Device for Lower Loading Platen (UTC-4629)

• Removable transparent front and rear safety doors

share
Sign in to leave a comment
Registration
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:
Комментарий:

Is located in sections

Back