EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units

0
0 сўм
Кол-во:
Description

Product Code

UTC-6729

2000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units

UTC-6739

3000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units

UTC-6749

4000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units

UTC-6759

5000 kN EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units

UTC-4684

Pedestal for 2000 kN and 3000 kN Four Column Compression Testing Frames

UTC-4686

Pedestal for 4000 kN and 5000 kN Four Column Compression Testing Frames

 

Standards

EN 12390-4, EN 12390-3, EN 772-1

 

UTC-6729, UTC-6739, UTC-6749 and UTC-6759 compression testing frames with four column for masonary units, cubes and cylinders consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens. acc. to EN standards.

EN four column compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.

The frames are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.

Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be  positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.

All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with their load capacities. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.The lower loading platens are provided with centering lines and fixture for centering specimens

UTC-4684 and UT-4686  Pedestals that are made of steel to facilitate  the user’s  placement of specimens in the frames for compression test should be ordered separately.

See the below table for supplied items with the frames.

 

EN 12390-4 and EN 772-1 COMPRESSION TESTING FRAMES WITH FOUR COLUMN

FOR CONCTERE CUBES AND CYLINDERS AND MASONARY UNITS

Models

UTC-6729

UTC-6739

UTC-6749

UTC-6759

Product Photo

UTC 6749 4000 kN Four Column

UTS 6748 4000 kN EN 2

UTC 6749 4000 kN Four Column

UTS 6748 4000 kN EN 2

Capacity

2000 kN

3000 kN

4000 kN

5000 kN

Frame Type

Four Column

Four Column

Four Column

Four Column

Lower Platens Dimensions (D)

310x510x50 mm

310x510x50 mm

310x510x50 mm

310x510x50 mm

Upper Platens With Ball Seating Assembly Dimensions (C)

310x510x50 mm

310x510x50 mm

310x510x50 mm

310x510x50 mm

Surface Hardness of Loading  Platens

≥ 55 HRC

≥ 55 HRC

≥ 55 HRC

≥ 55 HRC

Flatness Tolerance

0,03 mm

0,03 mm

0,03 mm

0,03 mm

Piston Diameter

250 mm

310 mm

360 mm

400 mm

Piston Stroke

50 mm

50 mm

100 mm

100 mm

Maximum Vertical Clearance Between Platens (E)

350 mm

350 mm

520 mm

520 mm

Horizontal CLearence (B)

348/168 mm

348/168 mm

426/309 mm

515 mm

Sizes  of Specimens For Cylinders (up to)

Ø150x300 mm

Ø150x300 mm

Ø150x300 mm

Ø150x300 mm

Sizes  of Specimens For Cubes (up to)

300 mm (**)

300 mm (**)

300 mm (**)

300 mm (**)

Sizes  of Specimens For Masonary Units (up to)

300x500 mm (**)

300x500 mm (**)

300x500 mm (**)

300x500 mm (**)

Dimensions (wxlxh) (Axd*xG)

590x560x1100 mm

680x690x1150 mm

772x825x1540 mm

865x640x1555mm

Weight

1040 kg

1540 kg

2555 kg

3260 kg

Pedestal (Optional)

UTC-4684

UTC-4684

UTC-4686

UTC-4686

(d*) depth      

(**) Limited by capacity of the  frame

 

The frames for masonary units,cubes and cylindrs  are supplied complete with;

• 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces (two pcs. each  for UTC-6749 and UTC-6759)

• UTC-4626E - Fixture for centering specimens, compatible with 310x510x50 mm lower loading platen, for 100 mm and 150mm cubes and  Ø100 mm and Ø150 mm cylinders (for UTC-6729 and UTC-6739)

• UTC-4627E - Fixture for centering specimens, compatible with 310x510x50 mm lower loading platen, for 150mm and 250mm cubes, Ø150mm and Ø250mm cylinders for UTC-6749 and UTC-6759

• Lifting Device for Lower Loading Platen (UTC-4629)
• Removable transparent front and rear safety doors
Appropriate distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately for UTC-6729.FPR and UTC-6739.FPR

share
Sign in to leave a comment
Registration
If you are already registered on our website , but forgot your password , or you do not come to a confirmation email , please use the password recovery form.
Купить в один клик
Ваше имя:
Ваш контактный телефон:
Комментарий:

Is located in sections

Back